Manual Water Softener System

  • Home / Manual Water Softener System
image
  • image

Manual Water Softener System

A water softener is a fairly simple appliance that is stocked with salt. In water softening process the water supply passes through the water softener over resin beds, rows of resin beads perform an ion-exchange. The resin beads chemically attract the unwanted 'hard' mineral ions and exchange them with sodium ions.

A strong salt-water (brine) solution is created with the salt added to the softener. The brine solution flows through the resin tank, rinsing the beads and exchanging new sodium for the hard water minerals that have collected. This is known as the water softener backwash cycle.

 

Description

Technical Specification of Softone Manual  Softener
S. No. Parameters SMS-300
1 Water Flow Upto 15000 l/hr
2 Dimension (DxH) 21"x72"
3 Softener Vessels Pentair
Wound Resin Vessels & HDPE Brine Tank
4 Inlet Water Pressure 3 Kg/cm2
5 Testing Water Pressure
Max.
5 Kg/cm2
6 Inlet Max Hardness
(As Caco3)
800 ppm
7 Pressure Guage (Inlet/Outlet) Available
8 Treated Water Hardness (As Caco3) <50 ppm
9 Maximum Water Pressure 3.5 Kg/cm2
10 Minimum Water Pressure 1.5 Kg/cm2
11 Inlet/Outlet Connection Size 50mm/50mm
12 Drain Line 1"(25mm)
13 Treated Water Output at 100 ppm Assume on Assume hardness 550 ppm per recharge 27,000 litres
14 Brine Tank  Capacity 300 ltr.
15 Resin Quantity (ION Exchange) 225NA 300Ltr.
16 Installation
Area Required
Area Occupied 4x5
ft
17 Salt per Recharge in kgs 21Kg/Charging

Developed & Design By

whatsapp